Chemicals
As a Platinum BioGuard Dealer we make pool care brilliant. Our staff is trained annually and able to provide you with the latest technologies that make pool care easier. The BioGuard 3-Step Maintenance Program is a proven system to protect your investment and keep your pool looking better with less effort. BioGuard is the better way to blue.

3-Step Maintenance Program
Why spend a lot of time on pool care if you don't have to. The BioGuard 3-Step Program is the easy way to keep your pool sparkling clear and ready for fun.
Step1-
Sanitize your water. Because
BioGuard Silk Sticks and Silk
Smart Sticks are stabilized chlorines, they aren't as susceptible to
the sun's ultraviolet rays. The chlorine says in the water longer so you don't
have to add as much as often. They dissolve slowly, releasing the right amount
of chlorine into the water to give you 24-hour bacteria prevention. And the
patented Silk technology makes the water feel better while protecting your pool
with anti-corrosives and scale preventatives.
Step
2- Remove undesirable compounds and restore sparkle. Give your water back that sparkle
by removing compounds that can dull or cloud it. BioGuard
Smart Shock and BurnOut3 will
oxidize out contaminants and restore water clarity.
Step
3-Prevent algae growth. At first, algae growth is invisible to the naked eye. By the time you
see them, it's too late. You have a problem. The third and final step stops
algae before it starts. Back Up was
specially designed to work with stabilized chlorine. It works even better as
the water warms. For pools with attached spas, use non-foaming Algae All 60 to prevent algae growth.
Optimize Your Pool: For even stronger algae
protection and softer, more sparkling water add Optimizer once-twice a season. It’s the unofficial
Step4!
Free Computerized Water
Analysis
Bring your pool water to Contemporary
Watercrafters for a complete analysis to protect your pool and equipment and
keep your pool looking brilliant all summer long. Just 1 quarter in a clean
glass or plastic container is all we need to check your water balance and
maintenance chemical levels. Bring an inventory of the chemicals you already
have so we can guide you through the process of bringing your pool into
balance. We recommend that you have your water tested at least 3 times a
season:
1. At the beginning of the season, it is
important to verify that your water is still in balance after sitting dormant
all winter. After you have opened your pool, let it circulate at least 48 hours
or more and then bring us a sample.
2. In the middle of the season, bring us a sample so we can see how
things are going. Bouts with algae or excessive rain can affect water balance.
Let us make sure that you are still on-track.
3. Before you close your pool, make sure your pool is in balance. You do
not want to let your pool sit all winter if your water chemistry is incorrect.
Have a winter analysis done 5-10 days before you winterize your pool.